Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: resistanceDescription: VISHAY SH2522R00JS03 Through hole resistor, SH series, 22 ohm, 25 W, ± 5%, 550 V8429 -
![]()
Category: Plug in resistorDescription: RWM 8x45 Series 11 W, axial enameled wire wrapped power resistor, axial lead, fire-resistant power rating at 70 ° C | 9.5W ------------------------------------------------------------------------------------------------------------ C Body Length | 45.8 mm Body Diameter | 9.4 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.5191 -
![]()
Category: Plug in resistorDescription: RWM 8x45 Series 11 W, axial enameled wire wrapped power resistor, axial lead, fire-resistant power rating at 70 ° C | 9.5W ------------------------------------------------------------------------------------------------------------ C Body Length | 45.8 mm Body Diameter | 9.4 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.7461 -
![]()
Category: Plug in resistorDescription: RWM 8x45 Series 11 W, axial enameled wire wrapped power resistor, axial lead, fire-resistant power rating at 70 ° C | 9.5W ------------------------------------------------------------------------------------------------------------ C Body Length | 45.8 mm Body Diameter | 9.4 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.4981 -
![]()
Category: Plug in resistorDescription: RWM 6x22 Series 7W, axial enameled wire wound power resistor, rated power at 70 ° C with axis lead, power at 6W ---25 ° C, 7W resistance tolerance, ± 5% temperature coefficient,+75ppm/° C (typical value) limit element voltage, 350V temperature cycle, body length at -55 ° C+200 ° C, body diameter at 18 mm, lead length at 6.5 mm, lead diameter at 25 mm (minimum value), 0.8 mm # # # Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.7217 -
![]()
Category: Potentiometer and accessoriesDescription: SMTFine tuning - Product Selection Guide SMT Trimmers - Product Selection Guide3678 -
![]()
Category: Plug in resistorDescription: RS Series 10 W 0.5 Ohms 1% 90 PPM RW type silicon coated wire wound resistor7672 -
![]()
Category: Plug in resistorDescription: VISHAY RPS0250DH4R70JBZA3 Through hole resistor, RPS250 series, 4.7 ohm, 250 W, ± 5%, 5 kV1440 -
![]()
Category: resistanceDescription: VISHAY RPS0250DH1001JBZA3 Through hole resistor, RPS250 series, 1 kohm, 250 W, ± 5%, 5 kV3625 -
![]()
Category: resistanceDescription: VISHAY RPH100V1R000JB Through hole resistor, RPH 100 series, 1 ohm, 10 W, ± 5%, 1.9 kV2207 -
![]()
Category: resistanceDescription: VISHAY RPH100V10R00JB Through hole resistor, RPH 100 series, 10 ohm, 10 W, ± 5%, 1.9 kV7628 -
![]()
Category: resistanceDescription: VISHAY RPH100V2R200JB Through hole resistor, RPH 100 series, 2.2 ohm, 10 W, ± 5%, 1.9 kV8676
